How to add GPS to Your Raspberry Pi Pico | A Simple GPS Project

🔗 *The full guide* : _https://core-electronics.com.au/guides/raspberry-pi-pico/how-to-add-gps-to-a-raspberry-pi-pico/_

In this video, we will be learning how to add a GPS receiver module to a Raspberry Pi Pico. We will be taking a look at how GPS works, and how to wire up and code your project to get coordinates, as a final step, we will be making a short and sweet GPS project - a small device that tracks a target location and uses our current location to display the distance and direction to that target, allowing you to navigate there from anywhere on the surface of the earth.

🔧🔨🧰 Hardware featured in this guide:

*NEO-6M GPS Module:*
_https://core-electronics.com.au/catalog/product/view/sku/CE05949_
*Picos:*
_https://core-electronics.com.au/raspberry-pi/pico.html#category_2118_

💡❓ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _http://coreelec.io/forum_

0:00 What we are doing
0:20 How GPS works
1:57 What you will need
2:15 Wiring up the GPS module
3:00 Reading the raw UART output
6:55 Using a GPS library
9:25 Project: DIY navigation device

🌏🦘 *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:

• *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
• *Arduino* _https://core-electronics.com.au/arduino.html_
• *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
• *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
• *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
• *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_

The following trademarks are owned by *Core Electronics Pty Ltd:*

"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo