How to add GPS to an Arduino & Make a Simple Navigation Project

🔗 *The full guide* : _https://core-electronics.com.au/guides/arduino/how-to-add-gps-to-an-arduino/_

In this video, we will be learning how to add a GPS receiver module to an Arduino. We will be taking a look at how GPS works, and how to wire up and code your project to get coordinates, as a final step, we will be making a short and sweet GPS project - a small device that tracks a target location and uses our current location to display the distance and direction to that target, allowing you to navigate there from anywhere on the surface of the earth.

🔧🔨🧰 Hardware featured in this guide:

*NEO-6M GPS Module:*
_https://core-electronics.com.au/catalog/product/view/sku/CE05949_
*Arduino:*
_https://core-electronics.com.au/arduino.html#category_638_

💡❓ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _http://coreelec.io/forum_

0:00 What we are doing
0:23 How GPS works
1:56 What you will need
2:21 Connecting the GPS
4:14 Reading the raw GPS UART output
8:37 Using a GPS library
10:44 Project: DIY navigation device

🌏🦘 *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:

• *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
• *Arduino* _https://core-electronics.com.au/arduino.html_
• *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
• *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
• *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
• *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_

The following trademarks are owned by *Core Electronics Pty Ltd:*

"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo