The Factory | Neoden 8 (K1830) Maintenance & Gantry Exploration

This week in #TheFactory we're doing some maintenance on our Pick-n-Place machine and taking the opportunity to have a look at the hardware in the gantry.
The manufacturer sent us an air-tube upgrade kit that will supposedly perform better. The tubes fork from each nozzle, presumably for high and low pressure connections. While the cover's off, we have a gratifying poke around and take a look at what else lies under the hood.

If you have any questions about this content or want to share a project you're working on head over to our maker forum http://coreelec.io/forum

Core Electronics is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:

• Raspberry Pi https://core-electronics.com.au/raspberry-pi.html
• Arduino https://core-electronics.com.au/arduino.html
• Sparkfun https://core-electronics.com.au/brands/sparkfun-australia
• Adafruit https://core-electronics.com.au/brands/adafruit-australia
• Pololu https://core-electronics.com.au/brands/pololu-australia
• DFRobot https://core-electronics.com.au/brands/dfrobot-australia