Setting Up Your Makera Carvera (And Running Your First Cut!)

🔗 *The full guide* : _https://core-electronics.com.au/guides/cnc-milling/getting-started-with-the-makera-carvera-setup-and-first-cut/_

In this video, we will be showing you how to unbox and set up the Makera Carvera, as well as walking you through the first cutting job from the demo cutting guide.

🔧🔨🧰 Hardware featured in this guide:

*Makera Carvera:*
_https://core-electronics.com.au/catalog/product/view/sku/CE10409_
*Makera Cyclone Dust Extractor:*
_https://core-electronics.com.au/catalog/product/view/sku/CE10419_
*Makera:*
_https://core-electronics.com.au/cnc-machines/makera.html_

💡❓ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _http://coreelec.io/forum_

🌏🦘 *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:

• *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
• *Arduino* _https://core-electronics.com.au/arduino.html_
• *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
• *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
• *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
• *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_

The following trademarks are owned by *Core Electronics Pty Ltd:*

"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo