PiicoDev Distance Sensor VL53L1X | Raspberry Pi Pico Guide

Let's connect a PiicoDev Distance Sensor to a Raspberry Pi Pico and perform some distance measurements readings. This tutorial will guide you through wiring, uploading example MicroPython code in Thonny, and remixing the example to include new functionality.

The PiicoDev Distance Sensor uses a VL53L1X which can measure indoor ranges up to about 4m with 1% repeatability!

You can read the full guide here: https://core-electronics.com.au/tutorials/raspberry-pi-pico/piicodev-distance-sensor-vl53l1x-raspberry-pi-pico-guide.html

If you need help getting started with Thonny: https://core-electronics.com.au/tutorials/how-to-setup-a-raspberry-pi-pico-and-code-with-thonny.html

If you have any questions about this content or want to share a project you're working on head over to our maker forum http://coreelec.io/forum

Core Electronics is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:

• Raspberry Pi https://core-electronics.com.au/raspberry-pi.html
• Arduino https://core-electronics.com.au/arduino.html
• Sparkfun https://core-electronics.com.au/brands/sparkfun-australia
• Adafruit https://core-electronics.com.au/brands/adafruit-australia
• Pololu https://core-electronics.com.au/brands/pololu-australia
• DFRobot https://core-electronics.com.au/brands/dfrobot-australia

The following trademarks are owned by Core Electronics Pty Ltd:

"Core Electronics" and the Core Electronics logo
"PiicoDev" and the PiicoDev logo
"Glowbit" and the Glowbit logo