Plant IO | Sensors Guide

🔗 *The full guide* : _https://core-electronics.com.au/guides/plant-io-sensors-guide-connect-sensors-and-log-data/_

This guide is all about connecting additional sensors to observe even more about our plant and its environment, in turn, allowing us to conduct meaningful experiments. This guide assumes you've followed the Basic Setup Guide and are familiar with working programming a Raspberry Pi Pico in Thonny. (Check the article for more help!)

🔧🔨🧰 Hardware featured in this guide:

*The Plant_io Plant Cultivation Kit:*
_https://core-electronics.com.au/catalog/product/view/sku/CE09696_

💡❓ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _http://coreelec.io/forum_

0:00 Intro
1:09 Supported Sensors
2:09 Connect a Sensor
3:17 Code a Sensor
7:30 Use the extra mounting hardware to mount additional sensors
9:11 Analyse the Data
12:10 Closing thoughts

🌏🦘 *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:

• *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
• *Arduino* _https://core-electronics.com.au/arduino.html_
• *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
• *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
• *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
• *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_

The following trademarks are owned by *Core Electronics Pty Ltd:*

"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"Plant_io" and the Plant_io logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo