Board Walkthrough & Pinout | Raspberry Pi Pico Workshop: Chapter 1.4

🔗 *The full course* : _https://core-electronics.com.au/courses/raspberry-pi-pico-workshop/_

In this video, we will take a look at some of the *hardware* components on the *Pico*, as well as its *GPIO pins*. We will also learn the numbering system for the pins and also locate some important ones for *powering* our projects.

🔧🔨🧰 Hardware featured in this guide:

*Raspberry Pi Pico:*
_https://core-electronics.com.au/catalog/product/view/sku/CE08704_
*The Pico Variants:*
_https://core-electronics.com.au/raspberry-pi/pico.html#category_2118_

💡❓ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _http://coreelec.io/forum_

0:00 Board Walkthrough
1:11 GPIO Pinout
2:45 Power and Ground Pins

🌏🦘 *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:

• *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
• *Arduino* _https://core-electronics.com.au/arduino.html_
• *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
• *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
• *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
• *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_

The following trademarks are owned by *Core Electronics Pty Ltd:*

"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo