Mixing PLA and PETG is the Best Thing We’ve Ever Done

🔗 *The full guide* : _https://core-electronics.com.au/guides/3d-printing/how-to-get-cleaner-3d-print-supports-with-pla-and-petg/_

You may of heard of *PETG interface supports,* but have you actually tried them? We did, and the results are day and night. In this video, we will be taking a look at how to set them up in *slicer,* some comparisons of *different settings,* as well as looking at when you should and shouldn't use these depending on what *3D printer* you have.

🔧🔨🧰 Hardware featured in this guide:

*Bambu Lab H2C + AMS:*
_https://core-electronics.com.au/catalog/product/view/sku/BL-H2C-COMBO_
*Cyan PETG:*
_https://core-electronics.com.au/catalog/product/view/sku/CE10444_
*Black PETG:*
_https://core-electronics.com.au/catalog/product/view/sku/CE10443_
*Bambu Lab:*
_https://core-electronics.com.au/3d-printers-australia/professional-machines.html#category_7293_

💡❓ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _http://coreelec.io/forum_

0:00 Intro
1:19 Why This Works
2:25 Turning it on in Slicer
4:30 Comparisons to Regular Supports
9:13 Improving Interface Layers?
12:58 When You SHOULD Use This

🌏🦘 *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:

• *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
• *Arduino* _https://core-electronics.com.au/arduino.html_
• *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
• *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
• *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
• *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_

The following trademarks are owned by *Core Electronics Pty Ltd:*

"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo