Getting Started With The Arduino Uno Q

🔗 *The full guide* : _https://core-electronics.com.au/guides/arduino/getting-started-with-the-arduino-uno-q/_

In this guide, we will be taking a look at getting started with the *Arduino Uno Q.* We will be looking at what you will need, how to run the board both through both the *Linux environment* and over the *network,* as well as looking at some demos in *App Lab.*

🔧🔨🧰 Hardware featured in this guide:
*Uno Q 2GB:*
_https://core-electronics.com.au/catalog/product/view/sku/ABX00162_

💡❓ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _http://coreelec.io/forum_

0:00 Intro and What You Will Need
1:16 First Time Setup
2:55 Exploring App Lab
6:20 Wrap Up

🌏🦘 *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:

• *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
• *Arduino* _https://core-electronics.com.au/arduino.html_
• *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
• *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
• *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
• *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_

The following trademarks are owned by *Core Electronics Pty Ltd:*

"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo