2" Naphthalene & Charcoal Fireball
NightHawkInLight 0:17
112,943 views · 96 likes Watch on YouTube ↗
How to make the device shown: http://www.youtube.com/watch?v=c--z_eMnzAw&feature=channel_page
Well I cleaned my work area and wanted to get another video up, so I decided to give an idea I had a try. This fireball used 6 naphthalene moth balls ground to powder, This has not worked for me in the past very well because the naph tends to lump together. To prevent this I added around 5 grams of charcoal powder to the mix. It kept the naph nicely separated and fluffy. The lift was 4 grams BP with a slight bit of dirty flash spiking.
-~-~~-~~~-~~-~-
Check out my latest video: "How To View Invisible Air Currents With Lasers"
https://www.youtube.com/watch?v=K94Cc21KEIA
-~-~~-~~~-~~-~-
Well I cleaned my work area and wanted to get another video up, so I decided to give an idea I had a try. This fireball used 6 naphthalene moth balls ground to powder, This has not worked for me in the past very well because the naph tends to lump together. To prevent this I added around 5 grams of charcoal powder to the mix. It kept the naph nicely separated and fluffy. The lift was 4 grams BP with a slight bit of dirty flash spiking.
-~-~~-~~~-~~-~-
Check out my latest video: "How To View Invisible Air Currents With Lasers"
https://www.youtube.com/watch?v=K94Cc21KEIA
-~-~~-~~~-~~-~-
Playback is via YouTube's official embedded player. Data from YouTube; Exumo is not affiliated with YouTube.