Silver Cell Cranking Out 10 Troy Ounces of PURE SILVER per Day.

Eight Day Time Lapse Pure Silver Crystal Growth
https://youtu.be/v0i-raaqpS4

This is my six liter electrolytic silver cell. I buried the anode bar in the impure silver shot.

https://www.ebay.com/usr/sreetips

Silver Cell Build Step by Step From Scratch
https://youtu.be/oYOPfnYllo8

https://www.ebay.com/usr/sreetips

Electrolytic Gold Refining Cell Pt1
https://youtu.be/8GyoAXn7pHk

Silver Cell Anode Electrode Bars
https://youtu.be/YnxODFawBec

999 Fine Silver Bar 63 Troy Ounces
https://youtu.be/34gsbjL1nt8

Lets Melt Some Silver Bars
https://youtu.be/KcNAfplWuJw

Here’s a brief explanation: I use sterling silver to refine gold. I recover the silver from that and melt it into shot. The shot is about 98% silver, the rest is mostly copper. I add the 98% silver shot into the anode filter basket. The filter is made of Dacron material. I use an anode electrode bar cast into a 10 gauge copper wire (that’s connected to the positive side of the DC power supply) to pass an electric current through the 98% impure silver in the anode filter basket. The current flow causes the impure silver in the anode filter basket to dissolve. The dissolved silver passes through the Dacron filter and into the silver nitrate electrolyte. Any insoluble impurities get trapped in the filter and are saved for later processing. The silver ions (dissolved silver) travel through the silver nitrate electrolyte and deposit as high purity elemental silver on the inside of the stainless steel bowl. The stainless steel bowl is the cathode and it is connected to the negative side of the DC power supply, thus completing the electrical circuit for the cell to operate.