Using Teensy with Arduino IDE

If you’ve come looking for how to get your Teensy board up and running using the Arduino IDE, then you’ve come to the right place. Whilst you can use the standard Teensy loader application to flash compiled code directly to your Teensy, most people prefer to write and upload their code straight from the Arduino IDE, taking advantage of the glorious libraries and Wiring abstraction.

If you’re not 100% sure what this ‘Teensy’ device is that we’re talking about, not to worry, just head over to our What is Teensy and Teensy Boards Compared tutorials, check them out, and head back over here to get it setup. We won’t be going into the basics of working with the Arduino IDE here, so check out our Arduino tutorials for more info on that and without further ado, let’s press on.


Full tutorial - https://core-electronics.com.au/tutorials/using-teensy-with-arduino-ide.html

Teensy in Australia - https://core-electronics.com.au/brands/teensy-australia-pjrc





Core Electronics is your home in Australia for:

Raspberry Pi https://core-electronics.com.au/brands/raspberry-pi-australia

Arduino https://core-electronics.com.au/brands/arduino-australia

Sparkfun https://core-electronics.com.au/brands/sparkfun-australia

Adafruit https://core-electronics.com.au/brands/adafruit-australia

Pololu https://core-electronics.com.au/brands/pololu-australia

DFRobot https://core-electronics.com.au/brands/dfrobot-australia